Using Additional Handsets; Conference Calls - AUDIOLINE BIGTEL 100 Bedienungsanleitung

9. Using additional handsets

Making internal calls
There must be two or more handsets (HS1, HS2) registered to
a base station in order to make internal calls free of charge��
, , eg 2
HS1:
HS2:
HS1/HS2:
Transferring external calls internally
, , eg 2
HS1:
HS2:
HS1:
If the called handset does not answer, you can take the call
back by pressing the INTERCOM button��
Service−Hotline Germany: Tel. 0180 5 001388, cost via German landline at time of going to print: 14 ct/min., different costs possible via mobile telephone systems
Dial the internal call number of the
required handset
Accept the internal call on the other
handset
End the internal call
During an external call, dial the
number of the required handset
Accept the internal call on the other
handset
External call is transferred to the
other handset
Using Additional Handsets

Conference calls

You can hold a conference call between 1 external and 2
internal callers��
, , eg 2
HS1:
HS2:
HS1: 2 sec
HS1/HS2:
HS1/HS2:
Handset registration
You only need to register a handset that has become
deregistered from the base or if you have purchased a new
handset��
New handsets must be fully charged before you attempt to
register them��
At the base
10 sec ,
At the handset
, or ,
, ,
During an external call, dial the
number of the required handset
Accept the internal call on the other
handset
Activates conference call
Put external call on hold
End conference call
Activate registration mode
Open the menu, select 'REGISTER'
Enter the base number (1,2,3 or 4)
Enter the PIN code and confirm
GB
33