Cleaning And Care - Klarstein 10031822 Hinweise

• Clean the device every week. Please disassemble the air flue before cleanness and pour out the water accor-
ding to the below picture instruction. And then wipe the device by the dry cloth. Put the device in a shady and
cool place. When clean the valve body and sealing ring of the air flue, please disassemble this part and clean up
the water scale, dust and other dirty. After cleanness, please assemble all the spare parts together without any
distortion. When assemble the air flue to the device, please make sure the air flue will be locked tight.
Water
Direction
• If don't use the device for a long time, please clean the device up and put it in a shady and cool place.
• For the areas, the water is hard. There will be water scale on the transducer.The user should clean the trans-
ducer with oxalic acid based agent regularly and clean the water tank and water sink every week. Disassem-
be the air flue, add 10ml oxalic acid based agent to soak for 2~5 mins and clean the scale with brush. Then
flush with clean water.
If the machine doses not work appropriately, please check as following before turn to maintenance service:
Problem
No wind and no steam. Check plug.

Cleaning and Care

Open
Troubleshooting
Possible Cause
Check the power switch.
No water in the tank.
Less water in the tank.
Close
Solution
Insert the plug..
Turn on the power switch.
Add water into the tank.
Add enough water into the tank.
10