Cleaning And Care - Klarstein TOLEDO Bedienungsanleitung

CLEANING AND CARE

• Clean the device every week. Please disassemble the air flue before cleanness
and pour out the water according to the below picture instruction. And then
wipe the device by the dry cloth. Put the device in a shady and cool place.
When clean the valve body and sealing ring of the air flue, please disassemble
this part and clean up the water scale, dust and other dirty. After cleanness,
please assemble all the spare parts together without any distortion. When
assemble the air flue to the device, please make sure the air flue will be locked
tight.
Pour water in this
direction
• If don't use the device for a long time, please clean the device up and put it in
a shady and cool place.
• For the areas, the water is hard. There will be water scale on the transducer.
The user should clean the transducer with oxalic acid based agent regularly
and clean the water tank and water sink every week. Disassembe the air flue,
add 10ml oxalic acid based agent to soak for 2~5 mins and clean the scale with
brush. Then flush with clean water.
Open
Close
EN
15