Operation; Cleaning And Care - Klarstein 10029718 Handbuch

1. Before switching on the device, check that the machine is turned off.
2. Pull off the two covers( outer2 and inner 3) .
3. Fill in the tan with cold tap water without exceeding the MAX level.
4. Add 3~10 essential oil drops directly in the tank.
5. Replace the two covers.
6. Then plug the cord in an electrical socket.
7. Press the power switch on/off.
After a few second, diffusers a fine fragrant mist. Machine automatically switches off when the tank is empty.
Repeat the procedure described above. The machine is now ready to work again.
Button funtions
On/Off
Function aroma wave
Notes:
• Check that the housing is not swamped.
• Do not use solvents or abrasive products when cleaning the device.
• Change the water in the tank at least once every 72 hours (in case of occasional usage) in order to avoid
any bacteria growth.
Daily maintenance
• Before any operation, unplug the device.
• Empty the water from the tank and rinse off with clear water in order to remove any eventual scale deposit.
• Dry the tank with absorbent tissue.
Monthly maintenance
• Fill the tank with water added with a small quantity of white vinegar. Leave for 15 minutes then drain, rinse
and dry.

Operation

Press the power switch once to turn the device on.
Press the power switch a second time to turn the smooth LED light on.
Press the power switch a third time to turn off.
Press the key aroma wave for the interval model(10 minutes on then 20 minutes
off), the LED blinks 3 times.
Press the key to switch off the interval mode, the LED blinks once.

Cleaning and Care

8