Herunterladen Diese Seite drucken

Functional Description - retox Commander Bedienungsanleitung

Chronograph

Werbung

Hour Display -
Stopwatch Function
Date Display
Setting the Date
The date is set by pulling the winder out to position "1". Now you can set the date. Turn
the winder counter clockwise until the date display shows the current date. After setting,
push the winder back to the "0" position.
Setting the Time of Day
The time is set by pulling the winder out to position "2". Now you can set the time. Turn
the winder counter clockwise until the date display shows the current time. After setting,
push the winder back to the "0" position.
On the lower display "Seconds Display – Time" you can always read the current seconds.
Setting the Stopwatch
If the large second hand does not precisely point to "60", pull the winder out to position
"2". Keep pressing "Button P1" until the second hand of the stopwatch precisely points to
"60". After setting, push the winder back to the "0" position.
Function of the Stopwatch
In order to reset the stopwatch, press "Button P2" once. Now the hours, the minutes and
the seconds of the stopwatch function are automatically reset.
For starting the stopwatch, the "P1 Button" must be pressed once. A repeated pressing of
"Button P1" will stop the measurement. Now you can read the hours, minutes and
seconds that have passed on the appropriate displays (see figure). For resetting the
displays, press "Button P2".
Cleaning and Maintenance:
Clean the watch using a damp cloth only. Under no circumstances use abrasive or
aggressive chemicals.

Functional Description

V
Seconds Display - Stopwatch Function
Minutes Display – Stopwatch
0
Seconds Display - Time
Button P1
Crown
1
2
Button P2

Werbung

loading