Werbung
Functional Description
Setting the Watch
Pull the crown when the seconds hand is at the 12 o'clock position. Now set the
watch with the crown. When you press the crown in, the seconds setting of the
analogue and digital clocks are synchronised.
To set the digital clock, press and hold the mode button at 4 o'clock for more than
2 seconds. The seconds display lights up and starts to flash. You can now set the
seconds with the select button at 2 o'clock.
After pressing the 4 o'clock button again you can set the minutes with the 2
o'clock button. In the same way you can now switch to setting the hours, which
you can set with the 2 o'clock button. After that, you can move on to deciding
between 12 and 24 hour display modes; after that you can go on to setting the
year, the date and the date display mode.
Normal Use
During normal use you have the digital display light up for two seconds by
pressing the 2 o'clock button. Press again to have the date displayed and press
once more to see the running seconds.
V
Werbung
