Recommendations For Use; Display Functions - Phocos CMLNL Bedienungsanleitung

The controller adjusts itself automatically to 12V or 24 V system
voltage. As soon as the voltage at the time of start-up exceeds
20.0V, the controller implies a 24V system. If the battery voltage
is not within the normal operation range (ca. 12 to 15.5V or ca.
24 to 31V) at start-up, a status display according to the section
ERROR DESCRIPTION occurs.
Battery Type
The controller is preset to operate with lead acid batteries with
liquid electrolyte. If you intend to use a lead-acid battery with
solid electrolyte ('gel' type or 'fleece' type) you can adjust the
charging characteristics (see "Settings"). The equalization charge
is deactivated then. In case of any doubts consult your dealer.

Recommendations for Use

The controller warms up during normal operation.
The controller does not need any maintenance or service. Remove
dust with a dry tissue.
It is important that the battery gets fully charged frequently (at
least monthly). Otherwise the battery will be permanently damaged.
A battery can only be fully charged if not too much energy is drawn
during charging. Keep that in mind, especially if you install additional
loads.

Display Functions

The controller is equipped with 5 LEDs and an acoustic warning
signal.
25