Recommendations For Use - Phocos CXN Bedienungsanleitung

for functions of datalogger.
The charge controller has a number of safety and display functions.

Recommendations for Use

The controller warms up during normal operation. If there is insufficient
ventilation (e.g. in an installation cabinet), the controller limits the solar
charge current to prevent overheating.
The controller does not need any maintenance or service. Remove dust with
a dry tissue.
It is important that the battery gets fully charged frequently (at least monthly).
Otherwise the battery will be permanently damaged.
A battery can only be fully charged if not too much energy is drawn during
charging. Keep that in mind, especially if you install additional loads.
Mounting and Connecting the Charge Controller
The controller is intended for indoor use only. Protect it from direct sunlight and
place it in a dry environment. Never install it in humid rooms (like bathrooms).
The controller measures the ambient temperature to adopt the charging voltage,
therefore it must be installed in the same room as the battery.
The controller warms up during operation. It shall be installed on a non flammable
surface only.
25