Installation Steps; Package Contents - Axis P13-E Series Installationshandbuch

Installation Guide
This Installation Guide provides instructions for installing AXIS P1354-E/P1357-E Network
Camera on your network. For other aspects of using the product, see the User Manual available
at www.axis.com

Installation Steps

1. Make sure the package contents, tools and other materials necessary for the installation
are in order. See page 9.
2. Study the hardware overview. See page 10.
3. Study the specifications. See page 15.
4. Install the hardware. See page 18.
5. Access the product. See page 22.
6. Set the focus. See page 23.

Package Contents

• Network Camera
- AXIS P1354-E
- AXIS P1357-E
• Terminal block connector
- 4-pin connector block for connecting external devices to the I/O terminal
connector
- 2x terminal connector 2-pin STR 2.5 mm BP AB
• Tools
- Torx T20 screwdriver
- Torx T30 screw bit
- Allen key
• Printed materials
- Installation Guide (this document)
- Extra serial number label (2x)
- AVHS Authentication key
AXIS P13-E Series
9