Connect The Cables - Axis P13-E Series Installationshandbuch

7. Install the top cover. Make sure to tighten diagonally opposite bottom cover screws a
few turns at a time until all are tight. This will help ensure that the bottom cover gasket
is compressed evenly. Do not tighten the screws completely the first time.
8. Install the cable cover and tighten the cable cover screws.
9. Loosen the sunshield adjustment screws and adjust the sunshield to the front position.

Connect the Cables

1
Network cables
2
I/O cable
3
Bottom cover
AXIS P13-E Series
1
21