Connect The Cables - Axis P12 Serie Installationsanleitung

AXIS P12 Network Camera Series

Connect the Cables

1. Optionally connect external input/output devices, e.g. alarm devices. For information on
the connector pins, see Connectors and Buttons on page 14.
2. Connect the main unit to the network using a shielded network cable.
3. Connect the sensor unit to the main unit. If required, the cable can be shortened, see
Shorten Sensor Unit Cable on page 25
4. Connect power, using one of the methods listed below:
- PoE (Power over Ethernet, Class 2). If available, this is automatically detected
when the network cable is connected.
- Connect power via the connector. For information on the connector pins, see
Connectors and Buttons on page 14.
24