Power Consumption; Install The Hardware; Remove The Protective Packaging - Axis P55 series Installationshandbuch

AXIS P55 Network Camera Series

Power Consumption

NO TICE TICE
NO NO TICE
Use a limited power source (LPS) with either a rated output power limited to ≤100 W
or a rated output current limited to ≤5 A.
PoE
Power over Ethernet (PoE)
IEEE 802.3af/802.3at
Type 1 Class 3 max. 12.95 W

Install the Hardware

NO NO TICE NO TICE TICE
Mount the product with the dome facing downward.
Read all the instructions before preparing to install the network camera since several installation
preparation steps require removing the top cover and would benefit from being completed together.
• Remove the protective packaging before installing the camera.
• The product is supplied with a clear transparent dome cover (premounted) and a smoked
transparent dome cover. To replace the dome cover, see page 17.
• A standard or high capacity SD card (not included) can be used to store recordings
locally in the product. See page 17.
• To install the product using a compatible bracket from AXIS T91A Mounting Accessories
(sold separately), see page 20.

Remove the Protective Packaging

See Hardware Overview on page 9 for location of components.
1. Loosen the four top cover screws and remove the top cover.
2. Remove the protective packaging.
AC
20-28 V DC, max. 22 VA
16
DC
20-24 V AC, max 13.5 W