Ec Declaration Of Conformity; Protecting The Environment - Black & Decker GD300 Handbuch

Vorschau ausblenden

Seite von 72

/ 72
Inhalt
Inhaltsverzeichnis
Lesezeichen

Inhaltsverzeichnis

Verfügbare Sprachen

Hints for optimum use

Do not force your raker through grass that is too long. It is

recommended that your raker should not be used in grass

that is longer that 75mm (3 inches) in length.

Do not use in wet or damp conditions.

To obtain the best result from your raker use it regularly.

It is recommended that your raker is used at the

beginning and end of each grass cutting season to give

your lawn a thorough scarifying. Your raker should also

be used after each mowing session to remove any grass

cuttings that may have been left behind by your raker.

Rake first in one direction and then at the next occasion

at right angles. Initially, this may make the grass look

bare and straggly but it will rapidly recover.

Maintenance

Your Black & Decker appliance has been designed to

operate over a long period of time with a minimum of

maintenance. Continuous satisfactory operation depends

upon proper appliance care and regular cleaning.

Keep the appliance clean and dry.

Regularly clean the ventilation slots with a clean, dry

paint brush.

Regularly use a blunt scraper to remove grass and dirt

from the appliance.

To clean the appliance, use only mild soap and a damp

cloth. Never let any liquid get inside the tool and never

immerse any part of the tool into liquid. Do not use any

abrasive or solvent-based cleaner.

Troubleshooting

If your appliance seems not to operate properly, follow the

instructions below. If this does not solve the problem, please

contact your local Black & Decker repair agent.

Warning! Before proceeding, remove the plug from

the socket.

Motor buzzes but the tine assembly does not move

Carefully remove any obstructions from the tines.

No noise and tine assembly does not move

Check that the power cables are properly connected.

Check the mains fuses.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you find one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product

available for separate collection.

Separate collection of used products and packaging

allows materials to be recycled and used again.

Re-use of recycled materials helps prevent

environmental pollution and reduces the demand

for raw materials.

Local regulations may provide for separate collection of

electrical products from the household, at municipal waste

sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and

recycling of Black & Decker products once they have

reached the end of their working life. To take advantage of

this service please return your product to any authorised

repair agent who will collect them on our behalf.

You can check the location of your nearest authorised repair

agent by contacting your local Black & Decker office at the

address indicated in this manual. Alternatively, a list of

authorised Black & Decker repair agents and full details of

our after-sales service and contacts are available on the

Internet at: www.2helpU.com.

Technical data

Voltage

Vac

Power input

No-load speed

min

Height adjustment

Weight