Technical Specifications - RoDEK R650FRD Installationsanleitung

R650FRD_Manual 2003 25.04.2003 17:11 Uhr Seite 21
6. TECHNICAL SPECIFICATIONS RODEK R650FRD
Rated Power Output (RMS)
All channels driven simultaneously
@ 13.8 V into 4 Ohms (THD<0.1%)
Rated Power Output (RMS)
All channels driven simultaneously
@ 13.8 V into 2 Ohms (THD<1%)
Rated Power Output
All channels driven simultaneously
@ 13.8 V into 4 Ohms (THD<1%)
Rated Power Output Bridged (RMS)
All channels driven simultaneously
@ 13.8 V into 4 Ohms (THD<1%)
Damping Factor @ 4 Ohms Load
All Channels
Signal-to-Noise Ratio (A-Filter Weighted)
All Channels @ full rated power output
Frequency Response (-3dB)
All Channels driven simultaneously
Channel Separation
All Channels
Input Sensitivity
All channel Pairs
Fuses
Dimensions (W x D x H)
Channels 1 – 4 Channels 5 + 6
4 x 50 W 2 x 96 W
4 x 77 W 2 x 150 W
4 x 70 W 2 x 119 W
2 x 150 W 1 x 310 W
> 140
> 94dB
10 Hz – 25 kHz
> 60 dB
200 mV – 6 V
2 x 25 A Mini-ATC
450 x 213 x 34 mm
21