PROUSER DRC4320 Bedienungsanleitung Seite 7

Please chose (for camera 1) or (for camera 2) followed by the Power button.
Shortly after please press the rubber button on the bottom of the camera until the signal
is well received by the monitor and "OK" appears on the screen. The unit will work
properly and will automatically pair by itself in the future operation. Press the menu
button to exit the selection or it will automatically exit after 30s.
This system can support up to max 2 cameras. By using the same operation it can
connect 2 cameras at the same time. Once both 2 cameras are all paired, by selecting
the arrow button on the monitor you can choose which camera image to be shown on
the screen.
With the icon you define which camera has priority when both cameras are used at
the same time.
Picture Settings:
To make changes to the picture settings please chose the menu „Picture SPEC" and
confirm with the Power button. Afterwards you can make changes to the Brightness,
Contrast and Colour. Please chose the menu accordingly, confirm with the Power button
and make changes with the arrows.
To save the settings and to leave the menu please press the menu button.
Orientation:
In the Menu "Picture direction" you can change the orientation of the picture. These
different views allow you to mount the camera and monitor in any position with keeping
the right picture on the monitor. Simply enter the "Picture direction" menu by choosing it
and pressing the Power button. The orientation of the picture will change every time
pressing the Power button.
To save the settings and exit the screen please press the menu button.
Product information:
In the Menu you can look up some product information by choosing the icon and
confirming by pressing the Power button.
Guideline button
This camera system has the option to show distance-
guidelines on the display. This helps you to visually see
the distance between the objects behind your car. By
pressing the guideline button, you can switch this option
on and off.
7