Bosch GTR 30 CE Professional Originalbetriebsanleitung Seite 17

OBJ_BUCH-1209-004.book Page 17 Wednesday, March 2, 2011 2:00 PM
Do not use blunt or damaged router bits.
Blunt or damaged router bits cause in-
creased friction, can become jammed and
lead to imbalance.
Do not keep combustible materials close to
your workplace. When working tiles, hot ma-
terial chips develop, which could start a fire.
Always wait until the machine has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Symbols
The following symbols can be important for the operation of your power tool. Please memorise the
symbols and their meanings. The correct interpretation of the symbols helps you operate the power
tool better and more secure.
Symbol Meaning
Bosch Power Tools
Products sold in GB only: Your product is fitted
with a BS 1363/A approved electric plug with in-
ternal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
Wear safety goggles.
Wear ear protectors. Exposure to noise can cause hearing loss.
Wear a dust respirator.
English | 17
2 610 016 614 | (2.3.11)