Using The Guest Mode - Omron MIT Elite Plus Gebrauchsanweisung

HEM-7301-ITKE_main.book Page 22 Friday, October 3, 2008 12:42 PM
3.Using the Unit

Using the Guest Mode

The monitor stores measurement values for one user in the memory.
The guest mode can be used to take a single measurement for another
user.
No measurement values are stored in the memory when the guest
mode is selected.
1.
Press and hold the O/I START button for 3 seconds.
The Guest symbol (
the display.
2.
Release the O/I START button.
The cuff starts to inflate automatically.
Note: To stop the inflation, press the O/I START button. The
monitor will stop inflating, start deflating and turn off.
3.
Inflation stops and the measurement is started. When the
measurement is completed, your blood pressure and pulse rate
appear on the display.
22
) appears on