Manual - ABB D1 Bedienungsanleitung

3-7 Manual

This enables the status of the outputs to be forced manually regardless of active
program. Possible settings:
Forcing
mode
auto
Perm
PERM
TEMP
EN
TEMP
Activate a forcing
c 2 P e r m
De-activate a forcing
1. Press combined keys of the channel to be de-activated (ref. subsection 1-6) for
approx. 2 secs.
16
Display Channel-
symbol Condition
c1
c2
c1 On
c2 On
c1 OFF
c2 OFF
c1 On
c2 On
c1 OFF
c2 OFF
1. Select sub-menu "OVERRIDE" using keys
2. Press
3. Press combined keys (ref. subsection 1-6) to select
channel (only twin channel models).
» The display shows information on channel(s)
(ref. table above).
4. Set type of forcing using keys
5. Press
» It returns to the main screen.
» The display shows the type of forcing on the
channel.
Forcing function
No forcing on channel; management
from program.
Permanent channel activated.
Permanent channel de-activated.
Channel activated until next program
activity.
Channel de-activated until next program
activity.
OK to confirm.
OK to confirm selection.
.
.