Create A New Program - ABB D1 Bedienungsanleitung

Behaviour of output load with programs from P01 to P06, according to the priorities.

2-3 Create a new program

i
Procedure valid for all types of programs Further settings are described in the
individual programs.
Selection of program type (e.g. with P Standard):
P 0 2
Select channel (only twin channel models)
c 1 c 2
P 0 2
1. Press MENU.
2. Select program type using keys
3. Press OK to confirm selection.
» The number of free programs appears for 3 secs.
» The first program in the memory appears.
4. Press for 2 secs.
» The display shows the first empty program.
5. Press OK to confirm.
» The program number is selected.
» Followed by channel setting.
1. Set channel (twin channel) using keys
» C1/C2 or both flash.
2. Press OK to confirm.
» The channel is set.
» Followed by day setting.
.
.
EN
9