TESTBOY TB 50 Bedienungsanleitung Seite 26

Operation
WARNING
After using each time, immediately flush the
testing pin with tap water and dry. Replace the
cap. Make sure that no residual brake fluid
remains on the test probes or instrument.
If the brake fluid comes into contact with your skin or clothes,
wash thoroughly with copious amounts of water. Do not
expose brake fluid to the atmosphere for a long period of time,
because it is very hygroscopic!
Self-test
Remove the cap (2) from the
tester and activate the button
(1) to switch on the instrument.
Immerse the test probes up to
the Max. (Figure Page 24) in
water. All LEDs should
illuminate.
26
1
Testboy
®
TB 50