Faber 110.0324.939 Gebrauchsanleitung Seite 7

Additional information for the installation
technician
Procedure to be used in case of malfunction
on the movement:
1. Check that the fuse is properly inserted and
that it has not burned out, for replacing the
fuse open the lighting unit and unscrew the
fuser holder and replace it with one having
the same characteristics (Rif.B).
2. Check that the hood canopy is fitted level
(the use of a spirit level is recommended).
3. Check that the four cables are all at the
same tension. The front left cable must not
be slacker than the others.
If even these operations do not solve the
problem contact the Technical Assistance.
6. LIGHTING
• For replacement contact technical
support ("To purchase contact technical
support").
7