Velleman MVR1 Bedienungsanleitung Seite 5

3.3 Recording/pausing/stop record
1. Shortly press the REC key under record mode to start record, as shown in the figure. Before recording, the
"InIt" will be showing on display for a few times.
2. Shortly press the REC key under recording status to pause record.
3. Shortly press the STOP key under recording/pause record status to stop record.
3.4 Play Record
1. Press PLAY to play the recording.
2. Press PAUSE to pause the playing recording.
3. Press UP to skip forward.
4. Press DOWN to skip backward.
5. Press STOP to stop the recording.
6. Hold STOP pressed for 2 seconds switch off the recorder.
3.5 Volume Adjustment
Press the VOL+ or VOL- key under playing status, the digital volume will change in increase or
decrease. Hold these two keys to rapidly increase/decrease volume. The volume is adjustable
in a scope of 32 levels, as shown in the figure.
3.6 Loop Mode
Shortly press the MODE key during playing to enter loop mode option. After rEP
displayed, press the UP or DOWN key to select: ALL (
( ) to record one record files, or, no icon indication will be displayed if you select
no loop. To exit this setting, press the MODE key to enter next setting. If there is no
key operation within 8s, the system will save current setting and exit to playing
record file status.
3.7 (A-B) Repeating the Recorded Files
While playing a record file, shortly press the MODE key under the loop mode option to enter the A-B repeating mode,
under which the A-B icon is highlighted and A- will flicker. Shortly press the UP key to select the starting point. Now
the A- will stop flickering and B begins to flicker. Shortly press the UP key again to select the end point after which
the B will stop flickering and start repeating. Shortly press the UP key for the third time to cancel repeating and
resume normal playing. The A- will flicker again. Wait before selecting a new starting point. If there is no key
operation within 8s, the system will save the current setting and exit to the playing record status.
MVR1
Before recording Initialization Recording
) to loop all record files, 1
5 VELLEMAN