3
LAYOUT
3.1
Overview
1
Cutting blade
2
Cutting head
3
Guard hood
4
"Bike" handle
5a/5b Throttle lever
6
Engine switch "off" and "on"
7a/7b Throttle lever lock
8
Carrying strap
9
Air filter cover
10
Petrol tank
11
Levers for "Choke" and "Run"
12
Petrol accumulation button
3.2
Safety devices
It is important that the GUARD HOOD is assembled in
order to prevent injuries to the operator due to objects
catapulted by the machine.
4
ASSEMBLING THE COMPONENTS
Some parts of the power scythe come disassembled.
For quick and easy assembly, read and follow the in-
structions below.
4.1
Assembly of the „D" handle
Place the rubber block (2) over the shaft and tighten
the upper part (3) and the lower part (1) of the handle
with the screws (4).
GB 4