Tone Control - Audisse Netbox Kurzanleitung

Loudness
When the radio is switched on, press the Loudness button to get compensation on lower and
higher frequency.
The effect will be more audible when the radio is in lower volume level. The display will show
"Loudness On" when Loudness function is applied. To turn off the loudness function, press the
Loudness button again. The display will show "Loudness Off".

Tone control

You can set up a custom Bass, Mid and Treble setting to your liking.
1. Make sure your radio is turned on. Press and hold the Volume control button to enter the "Tone
control" menu.
2. Rotate the Tuning Control Rotary to select "Bass", "Mid" or "Treble" and press the Tuning
Control Rotary to enter the adjustment mode.
3. Rotate the Tuning Control Rotary until the desired level (between -10 and +10) is displayed.
The sound will change as you adjust the level. Press the Tuning Control Rotary to confirm
the setting.
Safety and courtesy note:
To prevent possible hearing damage, do not listen at high volume levels for long periods or put
your ears too close to the speaker.
Please use the volume level responsibly with respectable consideration of the situation and other
people or animals in the vicinity.
Loudness
On
Loudness
Off
Tone control
Bass: 0
Mid: 0
Treble: 0
Bass
-10 +10
Mid
Mid
-10 +10
Treble
Treble
-10 +10
GB
31