Setting The Alarm Clock - Audisse Netbox Kurzanleitung

Setting the alarm clock

Your radio has two separate alarms which can be set to wake you to either the radio, Spotify, or
a buzzer alarm. In the event of a power interruption your radio has built in memory that will retain
your alarm settings. Ensure that the time is set correctly before setting the alarms.
Important note:
In Standby mode the alarm function can only be used when the radio is operated on AC power.
In Standby mode on battery power the radio will turn off fully after 30 seconds (battery power
save mode) and will not be turned on by the alarm function/settings.
1. Press and hold the Info/Menu button and rotate the Tuning Control Rotary until 'Main menu'
is highlighted. Press the Tuning Control Rotary to enter the menu.
2. Rotate the Tuning Control Rotary until 'Alarms' is highlighted and the press the Tuning
Control Rotary to enter the selection.
3. Rotate the Tuning Control Rotary until the desired alarm (1 or 2) is highlighted on the display.
Press the Tuning Control Rotary to enter alarm setup.
4. Rotate the Tuning Control Rotary until 'Time' is highlighted on the display. Press the Tuning
Control Rotary to adjust the alarm time.
5. Rotate the Tuning Control Rotary to choose the alarm hour. Press the Tuning Control
Rotary to confirm the setting.
6. Rotate the Tuning Control Rotary to choose the alarm minute. Press the Tuning Control
Rotary to confirm the setting. The display will then return to the alarm setting menu.
28
Main menu
FM radio
Bluetooth
AUX-IN
Sleep timer
Alarms
Alarms
Alarm 1: Off [00:00]
Alarm 2: Off [00:00]
Alarm 1
Enable:Off
Time: 00:00
Mode: Buzzer
Volume:20
Save
Alarm 1 time
00
07:
Alarm 1 time
07 :30