Audisse Netbox Kurzanleitung Seite 31

9. If setting the alarm to a radio or Spotify Connect option, rotate the Tuning Control Rotary to
highlight the 'Preset:'option then press the Tuning Control Rotary if you wish to change it. If
setting the alarm to a radio, choose from either the radio station 'Last listened' to, or from the
presets 1 - 30. If setting the alarm to Spotify Connect, choose from the presets 1-10. Scroll to
the chosen option and press the Tuning Control Rotary to confirm the selection.
Note: The alarm may only use a preset which has already been stored.
10. Rotate the Tuning Control Rotary until the 'Volume:' option is highlighted on the display and
press the Tuning Control Rotary if you wish to change it. The radio uses the saved volume
setting for each alarm when it sounds. Set the required volume using the Tuning Control
Rotary to confirm the setting.
11. In order to store the alarm settings rotate the Tuning Control Rotary until 'Save' is
highlighted. Press the Tuning Control Rotary to store the alarm settings. Your radio will
show 'Alarm saved' and will then go back to the list of alarms with the new alarm setting
shown in the display. If you decide not to save the settings, press the Backward button.
The display will show 'Save changes' with a 'YES' or 'NO' option. Rotate the Tuning Control
Rotary to choose 'NO' and then press the Tuning Control Rotary. 'Alarm not saved' will
show on the display. Active alarms are shown using small alarm indicators at the bottom of
the playing displays and on the clock display when in standby.
Note: If you make a mistake at any point while setting the alarms, use the Backward button to
go back to the previous screen.
30
Alarm 1 mode
Buzzer
Internet radio
Spotify Connect
DAB radio
FM radio
Alarm 1 preset
Last listened
1. 104.90MHz
2. 90.00MHz
3. 98.00MHz
4. 104.90MHz
Alarm 1 volume
Alarm 1
Date: 26/04/2016
Mode: FM radio
Preset: 1
Volume: 15
Save
Alarm
Saved