Klarstein 10031694 Bedienungsanleitung Seite 25

Problem
The device vibrates.
The device makes loud
noises.
The door does not close
properly.
The error message 'EL'
or 'EH' appears in the
display.
Possible cause
The device is not straight.
The bottles are vibrating.
There are items under the
device.
The device is not straight.
Normal operating noise.
The device is not straight.
The door was reversed
and not installed properly.
The door gasket is dirty.
The shelves are not
properly inserted.
The sensor is damaged.
Solution
Set the device on an even
surface.
Be careful that the bottles
are not touching.
Remove any interfering
items.
Set the device on an even
surface.
The rattling sound is
caused by the flow of
the refrigerant, which is
normal. When the cycle
ends, you will hear a
gurgling noise caused by
the refrigerant flow in your
device. The contraction
and expansion of the
inner walls can also lead
to popping and crackling
noises.
Set the device on level
surface.
Install the door correctly.
Clean the door gasket.
Insert the shelves correctly.
Have the sensor replaced
by a specialist company.
EN
25