Troubleshooting - Klarstein 10031694 Bedienungsanleitung

EN
24

TROUBLESHOOTING

Problem
The device does not run.
The device does not cool
enough.
The cooler / compressor
constantly turns on and
off.
The light does not work.
Possible cause
The plug is not plugged in.
The device is switched off.
The fuse has been bumped
or is broken.
The environment requires
a different temperature
setting.
The door has been
opened too often.
The door does not close
properly.
The gasket does not seal
properly.
The room temperature is
higher than usual.
The cooler has been
loaded too full.
The door has been
opened too often.
The door does not close
properly.
The gasket does not seal
properly.
The plug is not plugged in.
The fuse has been bumped
or is broken.
The light is switched off.
Solution
Plug the plug in.
Switch the device on.
Check the fuse.
Adjust the temperature
using the control panel.
Open the door as seldom
as possible.
Check the door gasket.
Check the door gasket.
Adjust the temperature.
Wait until the desired
temperature has been set.
Open the door as seldom
as possible.
Check the door gasket.
Check the door gasket.
Connect the device.
Check the fuse.
Switch the light on.