Inserting/Replacing The Batteries; General Information; On/Off Switch - Agatec PL5 Bedienungsanleitung

Introduction
Congratulations on the purchase of the new Agatec PL5.
Read carefully through the user manual before
you turn on the product.

General Information

The Agatec PL5 is a self-leveling 5-dot laser with plumb, level and square
beams. All 5 laser dots are set perpendicularly to each other.
Package contents: laser, pouch, 2 targets, universal mount, 3 x AA
batteries, user manual.
1
1
1
2
3
4
1
1. Laser beam aperture windows
2. Battery compartment
3. 1/4" tripod thread
4. ON / OFF switch;
pendulum lock
2
12 9
5
11
7
10
8
6
5. Magnets
6. 5/8" tripod thread
7. Angle scaling
8. Drywall track slot
9. 1/4" tripod screw
10. Rotational base
11. Plumb beam opening
12. Screw mounting hole
Inserting / Replacing the batteries
1. Lift up the battery compartment cover, located on the bottom of the instrument.
2. Insert the 3 AA batteries in the compartment, respecting the correct polarity
NOTE:
Use only alkaline batteries.
Do not use rechargeable batteries.
Remove batteries if the device will not be used for several months.
Extreme temperatures and the use of batteries with different levels of charge
can reduce the operating time of the instrument.
Features
ON / OFF switch
(OFF)
The PL5 uses a pendulum mechanism for self-leveling. When not in
use, the pendulum should always be in the Off position. Locking the pendu-
lum allows it to better withstand vibration during transportation or if unit is
dropped.
(ON)
When the On button is pushed to the right, the pendulum is unlocked
and it is free to automatically level or plumb. In order for the PL5 to automat-
ically level, it must be within 4.5° of level.
3