Product Features; Technical Data - BTI PROFILINE -Disfix 50 Bedienungsanleitung

Product Features

The numbering of the product features shown refers to
the illustration of the measuring tool on the graphic
page.
1 Delete button "C"
2 Memory subtraction button "M–"
3 Memory add button "M+"
4 Length and continuous measurement button
5 Area, volume and indirect length measurement
button
6 Display
7 Alignment aid
8 Laser warning label
9 Measuring button
10 Reference level button
11 Memory retrieve button "M="
12 Button for continuous laser beam
13 On/Off button
14 Positioning pin
15 Latch of the positioning pin
16 Latch of battery lid
17 Battery lid
18 Serial number
19 Laser beam outlet
20 Reception lens
21 1/4" thread
22 Laser viewing glasses*
23 Protective case
24 Carrying strap
Display Elements
a Battery indication
b Temperature indicator
c Measured value/result
d Unit of measure
e Measurement reference level
f Laser switched on
g Individual measured value (for length measure-
ment: result)
h Variable measuring functions
Length measurement
Continuous measurement
Area measurement
Volume measurement
Indirect length measurement
i Measured values stored
*The accessories illustrated or described are not
included as standard delivery.
1 609 929 J93 • 28.6.07

Technical Data

Digital Laser Rangefinder
Art. No.
Measuring range
Measuring accuracy
– typical
– maximum
Measuring duration
– typical
– maximum
Lowest indication unit
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
Laser beam diameter
(at 25 °C), approx.
– at 10 m distance
– at 50 m distance
Batteries
Rechargeable batteries
Battery live, approximately
– Individual measurements
– Continuous measurement
Automatic switch-off after
approx.
– Laser
– Measuring tool
(without measurement)
Weight according to
EPTA-Procedure 01/2003
Dimensions
Degree of protection
(excluding battery
compartment)
A) The working range increases depending on how well the
laser light is reflected from the surface of the target (scattered,
not reflective) and with increased brightness of the laser point
to the ambient light intensity (interior spaces, twilight).
In unfavourable conditions (e.g. when measuring outdoors at
intense sunlight), it may be necessary to use the laser viewing
glasses.
B) +0.1 mm/m at unfavourable conditions, e.g. at intense
sunlight
C) In the continuous measurement function, the maximum
operating temperature is +40 °C.
The measuring tool can be clearly identified with the serial
number 18 on the type plate.
English–2
BTI-Disfix 50
A)
0.05 ... 50 m
– 10 °C ... +50 °C
– 20 °C ... +70 °C
635 nm, <1 mW
4 x 1.5 V LR03 (AAA)
4 x 1.2 V KR03 (AAA)
58 x 102 x 34 mm
(dust and splash
water protected)
004060
r1.5 mm
r3 mm B)
<0.5 s
4 s
1 mm
C)
90 %
2
6 mm
30 mm
30000
5 h
20 s
5 min
0.18 kg
IP 54