Connecting An External Playback Device; Radio; Tuning The Stations - Medion LIFE X61555 Bedienungsanleitung

9. Connecting an external playback device

You can use the AUX IN or LINE IN connection to connect an external playback
device (for example a CD player or MP3 player).
 Move the POWER switch to the OFF position to switch the device to standby
mode.
 Switch off your external device.
 Plug one end of a 3.5 mm jack cord (not supplied with the device) into the AUX
IN socket on the top of the device or a stereo cinch cord (not supplied with the
device) into the LINE IN socket on the back of the device.
 Connect the other end of the cord to your external device.
 Switch on your external device.
 Switch on the party sound system by pressing the FUNCTION/
 Press the FUNCTION/
LINE).
Switch on the party sound system by moving the POWER switch to the
ON position.
 Press the FUNCTION/
(LINE IN) in the display.
The audio signal from your external device will now be played back.

10. Radio

 Press the FUNCTION/
The display indicates FM and the current frequency.
After an electrostatic discharge on the device, it may take up to 4
minutes for the device to play the last radio station received.

10.1. Tuning the stations

 Press the
/TUN. + or
 Hold down one of the buttons to automatically search for the next station.
The frequency of the radio stations is changed in 0.05 MHz steps.
However, this is not displayed. Instead, the last digit flashes once
without changing.
 Press the
/TUN. + or
172
button repeatedly to select the desired input (AUX/
button several times until you see AUH (AUX) or LINE
button once or several times to switch to radio mode.
/TUN.- button briefly to set a particular frequency.
/TUN.- button until the desired frequency is set.
button.