Maintenance; Optional Accessories - Makita RP0900 Bedienungsanleitung

Dust nozzle set (Accessory)
1. Dust nozzle
2. Thumb screw
009754
Use the dust nozzle for dust extraction. Install the dust
nozzle on the tool base using the thumb screw so that
protrusion on the dust nozzle fit to the notch in the tool
base.
Then connect a vacuum cleaner to the dust nozzle.
Fig.15

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off and
•
unplugged before attempting to perform inspection
or maintenance.
Never use gasoline, benzine, thinner, alcohol or
•
the like. Discoloration, deformation or cracks may
result.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
These accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Straight & groove forming bits
•
Edge forming bits
•
Laminate trimming bits
•
Straight guide
•
Templet guide 25
•
Templet guides
•
Templet guide adapter
•
Lock nut
•
1
or attachments
Only use accessory or
2
Collet cone 3/8", 1/4"
•
Collet cone 6 mm, 8 mm
•
Wrench 13
•
Wrench 22
•
Dust nozzle set
•
Router bits
Straight bit
Fig.16
D
6
1/4"
8
6
1/4"
6
1/4"
009802
"U"Grooving bit
Fig.17
D
6
009803
are
"V"Grooving bit
Fig.18
D
1/4"
009804
Drill point flush trimming bit
Fig.19
D
8
6
009806
8
A L 1
20 50
8 60
8 50
6
50
A L 1 L 2
6 50 18
A L 1 L 2
20 50 15
A L 1 L 2
8 60 20
6 60 18
mm
L 2
15
25
18
18
mm
R
3
mm
90
mm
L 3
35
28