Herunterladen Inhalt Inhalt Diese Seite drucken

Benning CM 7 Bedienungsanleitung Seite 18

Vorschau ausblenden Andere Handbücher für CM 7:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
-
The new battery has to be connected to the battery supply lines, and
arrange these such that they are not crushed between the housing parts.
Then place the battery into the battery compartment provided for this
purpose.
-
Place the battery compartment cover onto the bottom part and tighten the
screw.
See figure 7:
Make­your­contribution­to­environmental­protection!­
Do­ not­ dispose­ of­ discharged­ batteries­ in­ the­ household­
garbage.­Instead,­take­them­to­a­collecting­point­for­discharged­
batteries­and­special­waste­material.­Please­inform­yourself­in­
your­community.
9.4­ Calibration
To maintain the specified precision of the measurement results, the instrument
must be recalibrated at regular intervals by our factory service. We recommend
a recalibration interval of one year. Send the appliance to the following
address:
Benning Elektrotechnik & Elektronik GmbH & CO. KG
Service Centre
Robert-Bosch-Str. 20
D - 46397 Bocholt
0.­ ­ T echnical­data­of­the­measuring­accessories­
­
4­mm­Safety­test­leads­ATL­2
-
Standard: EN 61010-031,
-
Maximum rated voltage to earth ( ) and measuring category:
1000 V CAT III, 600 V CAT IV,
-
Maximum rated current: 10 A,
-
Protective class II (  ), continuous double or reinforced insulation,
-
Contamination class: 2,
-
Length: 1.4 m, AWG 18,
-
Environmental conditions:
Maximum barometric elevation for making measurements: 2000 m,
Temperatures: 0 °C to + 50 °C, humidity 50 % to 80 %
-
Only use the test leads if in perfect condition and according to this manual,
since the protection provided could otherwise be impaired.
-
Throw the test leads out if the insulation is damaged or if there is a break in
the cable/ plug.
-
Do not touch the bare contact tips of the test leads. Only grab the area
appropriate for hands!
-
Insert the angled terminals in the testing or measuring device.
.­ ­ E nvironmental­notice
At the end of the product's useful life, please dispose of it at
appropriate collection points provided in your country.
11/ 2006
Battery replacement
B ENNING CM 7
6

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis