Benning CM 7 Bedienungsanleitung Seite 11

Digital current probe multimeter for
- Direct voltage measurements
- Alternating voltage measurements
- Direct current measurement
- Alternating current measurement
- Resistance measurements
- Continuity testing
- Frequency measurement
Table­of­contents
.­ User­notes
2.­ Safety­note
3.­ Scope­of­delivery
4.­ Unit­description
5.­ General­information
6.­ Environment­conditions:
7. Electrical specifications
8.­­ Making­measurements­with­the­BENNING­CM­7
9.­­ Maintenance
0.­ ­ T echnical­data­of­the­measuring­accessories
.­ ­ E nvironmental­notice
.­ User­notes
These operating instructions are intended for
- skilled electricians and
- trained electronics personnel.
The BENNING CM 7 is intended for making measurements in dry environment.
It must not be used in power circuits with a nominal voltage higher
than 1000 V DC and 750 V AC (More details in Section 6. "Environmental
conditions")
The following symbols are used in these operating instructions and on the
BENNING CM 7:
Application around and removal from HAZARDOUS LIVE
conductors is permitted.
Warning of electrical danger!

Indicates instructions which must be followed to avoid danger to
persons.
Important, comply with the documentation!

The symbol indicates that the information provided in the operating
instructions must be complied with in order to avoid risks.
This

BENNING CM 7 is totally insulated (protection class II).
This symbol appears in the display to indicate a discharged
battery.
This symbol designates the „continuity test" range.
The buzzer is used for the acoustic result output.
(DC) Direct voltage or current.

(AC) Alternating voltage or current.
Ground (Voltage against ground).
Note
After unmark the adhesive label „Warnung..." (on battery compartment lid) the
English text appears.
11/ 2006
Operating­instructions
­ B ENNING­CM­7
symbol on the
B ENNING CM 7
BENNING CM 7

means that the
9