Klarstein 10028190 Anschluss- Und Anwendungshinweise Seite 19

Warnings
• The air conditioning system must be kept and transported upright. Otherwise, irreparable com-
pressor damage may occur. Leave the unit for at least 24 hours before putting it into operation.
• Switch off the device and disconnect it from the power supply before cleaning.
• Make sure that the product creates a steady stream of air. Ensure the air inlets and outlets are not
blocked.
• To prevent leaks, operate this unit on a horizontal surface.
• Any person performing work on a refrigerant circuit should have a current certifi cate from an in-
dustry-accredited assessment body. This ensures competence for the safe handling of refrigerants
according to an industry-recognised assessment specifi cation.
• If the device stops working, dispose of it properly.
• Store the device in a well-ventilated place when not in use.
• Store the device so that it is not damaged.
• Repairs may only be carried out by the manufacturer or an authorised specialist company.
• The cables connected to the device may contain potential ignition sources.
• Do not damage any components of the refrigerant circuit. Escaping refrigerant may not be noticed
because it is odourless.
• Maintenance and repairs must be carried out under the supervision of specialists in the use of
fl ammable refrigerants.
Information for rooms with refrigerant pipes
• Limit the piping to a minimum.
• Be careful not to damage the piping.
• Appliances with fl ammable refrigerants may only be installed in a well-ventilated room.
• Comply with national gas regulations.
• All mechanical connections must be freely accessible for maintenance purposes.
CAUTION
Risk of fi re! This device contains the fl ammable refrigerant R290. If the refrigerant escapes
and is exposed to an external ignition source, there is a risk of fi re.
19
Notes on Refrigerant R290