Field Of Application; Assemblying Of Wheels And Handle; Assemblying Of The Holding Hook; Parts Of The Steam Cleaner - Lavor Skyvap Anweisungen

Field of application

The steam cleaner is suitable for cleaning:
Wide surfaces, such as:
• Tiled floor, parquet, stone and linoleum floor.
• Wax-treated tiled floor (wax removal)
• Tiles or tiled walls
• Roller shutters, guillotine windows
• Carpets
Small surfaces, such as:
• Interstices of heat radiators, tile joints, skirting
boards
• Door or window frames
• Shutters
Glass surfaces, such as:
• Windows, glass walls
• Glass doors
• Mirrors
Upholstery, such as:
• Carpets and moquettes
• Upholstered furniture (sofas, airmchairs).
•ATTENTION!
Furniture surfaces can be treated with the steam
cleaner under the following conditions:
• Never clean with the direct steam jet.
• Always use a soft absorbent cloth
• Work with little steam pressure
• When you clean, don't exert any pressure with the
brush.

Assemblying of wheels and handle

• Assemble wheels by hand as shown in picture on
fig. B . No tool is required.
• The handle (13) must be fitted on the upper part
of the appliance with 4 screws (included in the
accessories supplied) (see picture on page II). You
will need a screwdriver for this operation (not
included in the accessories supplied).

Assemblying of the holding hook

• For a comfortable use of the two extensions,
assemble the holding hook (29).
• The holder must be fixed with screws (included in
the accessories) under the extensions (see picture
fig. B)

Parts of the steam cleaner:

1 Steam lever
2 Flexible hose
7 Window wiper
8 Steam indicator
9 Boiler cap
10 Plug and power cord
11 Wheels
12 Steam intensity regulator
13 Handle
14 Scrubbing brush with clamps
15 Cloth holding clamps
16 Brush-joint
17 Extension pipes
18 Spring button
19 Steam nozzle handle
20 Tilting sprayer
21 Brush
22 Triangular brush
23 Cloth
24 Cotton cover
25 Anti-scale bag
26 Funnel
27 Jug
28 Accessory bag
29 Holding hook

CONTROL PANEL

• 3 Steam pressure lamp (green)
• 4 Main switch
• 4/B ON-OFF switch light (orange)
• 5 Heater light (green)
• 6 Water indicator lamp (orange)

Starting the steam cleaner

Fill with water

(fig. E)
•ATTENTION!
• Before filling the boiler with water, unplug the
machine.
• Fill in the steam cleaner only with distilled water
or with tap water with low mineral contents.
• The formation of limescale in the machine can
cause the machine to overheat and clog the
steam outlet pipe.
• The steam cleaner must rest on a plane surface.
EN
53