Preparation Before Use; Maintenance & Care; Important Safeguards; Safety In Operation - Klarstein 10022265 Bedienungsanleitung

1. Take apart the grill plate, small pans and/or granite grill plate, clean with a soft damp cloth. Place
your appliance on the level and stable surface.
2. Check that the voltage marked on the product corresponds with your supply voltage. Ensure the
controller is in the "OFF" position before plug in.
1. Connect the BBQ to the power supply. Turn the switch from "OFF" TO "MAX" position and the
indicator light is on for working, then pre-heating the BBQ set for 5 minutes, and use the heat
setting (Min. to Max.) by degrees.
2. As the different heat of cooking request, put your food on the small pans and place them under
the heating sources. Or place your food directly on the grill plate for the purpose of grilling.
3. When you have finished using the BBQ, turn the switch to "OFF" position and unplug it from the
socket. Wait until the appliance is completely cool down before moving or cleaning.
1. Make sure the plug is removed from the power supply socket. After the BBQ grill set is completely
cooled down, clean it with the mild cleaner or gel-like cleaner by using soft cloth.
PLEASED DO NOT CLEAN THE SET WHEN IT IS STILL HOT.
2. DO NOT USE hard brushes, scratchy materials and/or alcohol, petrol or any organic cleaner for
the cleaning purpose
3. Except the removable grill plate, do not immerse the main body in water to clean.
4. Put the BBQ grill set on the cool place right after the cleaning.
1. CORRECT USE OF ELECTRICITY
a) To prevent the risk of electric shock, DO NOT USE the set with broken power supply wires or
broken plug. All repair works must be made by a professional (authorized distributor). NEVER
TRY TO REPAIR the cable or plug by yourself. Please take the damaged set to your local
authorized maintenance center
b) Use of an extension cord is not recommended as it may overheat and cause risk of fire. However,
if an extension cord must be used, the cord should be 1.0mm2 or NO.14AWG standard.
c) To prevent overloading and blowing fuses, ensure that no other high power appliance is plugged
into the same socket, or another socket which is connected in the same circuit.
d) DO NOT PUT the cord under the carpet, blankets. Always keep the power cable away from
walkway in room.
e) DO NOT TRY TO REPAIR the broken fuse by yourself, the user should take the set to your local
authorized maintenance center to replace it with the new one.

2. SAFETY IN OPERATION

a) DO NOT OPERATE this BBQ set near water sources or flammable liquids.
b) DO NOT OPERATE this BBQ set on or near any hot surface. (Hot plate, electric stoves etc).
c) Ensure the BBQ set is placed on a stable, secure surface to eliminate the possibility of tipping over
or avoid any water in the set.
d) Closed supervision is necessary when this BBQ set is used by children. Never operate this
appliance unattended.
e) Always operate this BBQ set from an earthed domestic 220-240V~
f) Never try to touch the hot surface of this BBQ set before it is cool down.
CHAL-TEC Vertriebs- + Handels GmbH; Wallstraße 16; 10179 Berlin, Germany
5

PREPARATION BEFORE USE

OPERATION
MAINTENANCE & CARE

IMPORTANT SAFEGUARDS

50Hz power socket.