Before First Use; Use And Operation - Klarstein 10028450 Handbuch

• Keep up small objects (eg, bolts and other mounting hardware) and packaging parts out of the reach of child-
ren. Don't let your children play with packing materials. Danger of suffocation!
• Do not place any naked flame sources, such as lighted candles, on the apparatus.
• Set up the unit on a dry, flat, water-resistant and heat-resistant surface
• Search for a location from where children can not get to the hot surfaces of the device.
• The socket must be readily accessible to disconnect the unit quickly in an emergency from the circuit can.
• Do not install or move this unit in a bookcase, built-in cabinet or any other confined space. Ensure good
ventilation of the unit.
• Don't set up the unit on amplifiers or other equipment which may become hot. The heat can damage the
device.
• Don't expose the unit to direct sunlight, high temperatures, high humidity, and excessive vibration.
• The AC adapter can operate on AC 220 - 240 V. Use an appropriate plug adapter if the plug does not fit into
the power outlet.
• This equipment is used for heating food. It is intended solely for this purpose and should only be used for
this purpose. It may only be used in the manner as described in this manual.
• This appliance is not intended to be used with reduced physical, sensory or mental capabilities, or lack of
experience and / or knowledge by persons (including children), unless they are supervised by a person
responsible for their safety or received from instructions on how to use the device to. Children should be
supervised to ensure that they do not play with the appliance.
• Please keep the original packaging. In order to achieve adequate protection during transport of the unit, pack
the unit in its original packaging.
• Repairs to the appliance should only be performed by an authorized service center.
• A remodeling or modification of the affected product safety. Risk of injury!
• Open the product never arbitrarily and perform repairs never yourself!
• Incorrect reassembly may result in malfunction or total failure. Never open the device.
• We assume no liability for consequential damages. Technical changes and errors excepted!
• Note: The warranty is void if the instrument is in the device.
• Take apart the grill plate, small pans and/or granite grill plate, clean with a soft damp cloth.
• Place your appliance on the level and stable surface.
• Check that the voltage marked on the product corresponds with your supply voltage.
• Ensure the controller is in the "OFF" position before plug in.
1. Connect the BBQ to the power supply. Turn the switch from "OFF" TO "MAX" position and the indicator
light is on for working, then pre-heating the BBQ set for 5 minutes, and use the heat setting (Min. to Max.)
by degrees.
2. As the different heat of cooking request, put your food on the small pans and place them under the heating
sources. Or place your food directly on the grill plate for the purpose of grilling.
3. When you have finished using the BBQ, turn the switch to "OFF" position and unplug it from the socket.
Wait until the appliance is completely cool down before moving or cleaning.

Before first Use

Use and Operation

6