Heat-Up Diagram; Country-Specific Approvals And Certifications; Extreme Operating And Fault Conditions; Details On Energy Consumption - STIEBEL ELTRON UFP 5 h Bedienung Und Installation

INSTALLATION
Specification

15.3 Heat-up diagram

The heat-up period depends on the degree of scaling and residual
heat. For the heat-up time for a cold water supply at 10 °C and a
maximum temperature setting, see the diagram.
15
10
5
0
35 40 45 50 55
x Temperature in °C
y Duration in min

15.4 Country-specific approvals and certifications

The test symbols can be seen on the type plate.

15.5 Extreme operating and fault conditions

In the case of faults, a peak temperature of up to 100 °C may briefly
occur in the system.

15.6 Details on energy consumption

Product data complies with EU regulations relating to the Directive
on the ecodesign of energy related products (ErP).
Manufacturer
Load profile
Energy efficiency class
Energy conversion efficiency
Annual power consumption
Default temperature setting
Sound power level dB(A)
Daily power consumption
www.stiebel-eltron.com
60 65 70 75 80 85
UFP 5 h UFP 5 h LABS
222158
STIEBEL ELTRON STIEBEL ELTRON
XXS
A
% 38
kWh 491
°C 55
15
kWh 2,276

15.7 Data table

Hydraulic data
Nominal capacity
Mixed water volume at
40 °C
Electrical data
Rated voltage
Rated output
Rated current
MCB/fuse rating
Phases
Frequency
Application limits
Temperature setting range
Max. permissible pressure
Max. flow rate
Energy data
Standby energy consump-
tion/24 h at 65 °C
Energy efficiency class
Versions
IP rating
Type of installation
Type
Internal cylinder material
Thermal insulation material
Casing material
233076
Colour
Connections
XXS
Water connection
A
Dimensions
38
Depth
491
Height
55
Width
15
Weights
2,276
Weight

Guarantee

The guarantee conditions of our German companies do not
apply to appliances acquired outside of Germany. In countries
where our subsidiaries sell our products a guarantee can only
be issued by those subsidiaries. Such guarantee is only grant-
ed if the subsidiary has issued its own terms of guarantee. No
other guarantee will be granted.
We shall not provide any guarantee for appliances acquired in
countries where we have no subsidiary to sell our products.
This will not affect warranties issued by any importers.

Environment and recycling

We would ask you to help protect the environment. After use,
dispose of the various materials in accordance with national
regulations.
UFP 5 h UFP 5 h LABS
222158
l 5
l 10
V 220 230 240 220
kW 1.8 2.0 2.2 1.8
A 8.3 8.7 9.1 8.3
A 10 10 10 10
1/N/PE
Hz 50/60
°C approx. 35 – 85
MPa 0
l/min 5
kWh 0.23
A
IP24 D
Oversink
Open
PP
EPS
PS
white
G 1/2 A
mm 222
mm 418
mm 252
kg 3.1
UFP 5 h |
233076
5
10
230 240
2.0 2.2
8.7 9.1
10 10
1/N/PE
50/60
approx. 35 – 85
0
5
0.23
A
IP24 D
Oversink
Open
PP
EPS
PS
white
G 1/2 A
222
418
252
3.1
19