Transportation On Trailer; Environment; If You Fall Overboard; Fire Protection - Linder ARKIP 460 Bedienungsanleitung

Transportation on trailer

If you fall overboard

Make sure that the center rollers on Use the ladder at the stern of the boat
the trailer support all the weight of to climb back into the boat. NOTE! The
the boat on the keel. Adjust the side engine must be shut down (D).
supporters to eliminate all movement
of the boat. Do not forget to secure Regular service checks (C)
the boat with appropriate straps. Make - bilge pump
sure the boat is empty during transpor- - battery
tation (C). When trailing the boat with - steering system
drivable cover (not harbor cover) max - tank and fuel pipe
speed is 30 km/h. - fire extinguisher

Environment

Fire protection

By filling up the fuel, avoid fuel waste. Do not block access to the portable
A running engine releases exhaust fire extinguisher in the stow compart-
gases that can have a detrimental ment. Smoking is prohibited whenever
effect on the environment. Reduce fuels are being handled. Do not block
speed and surges out of regard for or prevent ventilation of the space
people´s security and comfort. Your surrounding the fuel tank. Keep the
Linder is produced in recyclable mate- keelson clean by removing the stow
rial that you get paid for when the boat box (refer to page 33) and check regu-
has made the last trip. The material larly for signs of fuel leakage or gas
can be recycling time after time! The vapours (W).
amount of aluminum is approx 90%
of the boat weight. You don't have to
disassemble the boat, just leave it to
the recycle company.
28 (76)

Fire-extinguishing equipment

The fire extinguisher is stored in the
stow compartment on the left (port
side) side of the boat and is clearly
labelled with a sign. Please refer to the
outline drawing on Page 33.
To use: Remove the pin in the handle,
point the hose towards the bottom of
the flames and press down the handle.
In the case of fire outbreak in the area
surrounding the fuel tank, insert the
hose into the Fireport and press down
the handle. Service maintenance accor-
ding to details on the fire extinguisher.
Fire extinguisher capacity: 13A 89B C.

Electrical system

Corrosion

Electrical system is powered by 12V Prevent metal items, iron, copper, brass
current. The main power switch is loca- or similar metals from remaining in
ted close to the fuel tank. Please also contact with aluminium surfaces on the
refer to the outline drawing on Page boat for more than necessary, as this
33. The battery has to be stored in the will reduce levels of corrosion (C).
box provided. Refer also to the wiring
diagram on Page 31. The main power Information of electrical bilge pump
switch only isolates the 12V socket & and main power switch
navigation lights and does not affect Linder 460 Arkip is fitted with an automa-
the bilge pump. tic bilge pump and main power switch.
From the year model -08 the positions
Service (electrical system) AUT and MAN are in the panel.
It is important to treat the battery
with care if all electrical equipment is Position AUT
to operate as expected. Check bat- In normal position the bilge
tery levels regularly to make sure that it pump is in AUT position
maintains the correct level (C). Smoking and the bilge pump bail
is prohibited when servicing the battery the boat automatically
as it emits an explosive gas (W), when if needed. Always make
charging. Use distilled water when top- sure that there is sufficient
ping up the battery. power in the battery.
Position MAN
In position MAN the pump is operated
manually.

If the bilge pump does not work

The boat is equipped with an automa-
tic electric bilge pump, which requi-
res occasional checking. Always make
sure there is sufficient charge in the
battery (C).
If the bilge pump does not work,
please check the following;
– The battery is fully charged and
connected
– The fuse has not blown
– The filter to the pump is clean and
free from debris
– The wiring to the pump and switch
AUT
is intact
If the pump fails and the boat fills
with water, it may overrun the battery,
which will short out the electrical sys-
tem and may cause galvanic corrosion
MAN
to the boat.
The bilge pump is not meant to be able
to bilge the boat after a hull damage.
The pumps capacity is max 38 l/min.
29 (76)