Care And Cleaning - Kenwood BL760 series Bedienungsanleitung

to use your mill
1 Put your ingredients into the jar.
(Refer to the mill recommended
usage chart).
2 Fit the sealing ring
blade unit marked
seal is located correctly in the
grooved area.
Ensure that the seal is fitted
G
correctly.
3 Then clip the blade unit
mill base .
4 Turn the mill blade assembly upside
down. Lower it into the jar, blades
down. Turn in a clockwise direction
to lock.
5 Place the mill onto the power unit.
6 Select a speed or use the pulse
control. (Refer to the mill
recommended usage chart).
mill recommended usage chart
Ingredients
Nuts
Coffee Beans
Uncooked Meat
Beef Steak - cut into 2
Herbs
Baby Food & Fruit Purees
Spices -
black peppercorns,
cardamom seeds, cumin seeds,
coriander seeds, fennel seeds and
whole cloves

care and cleaning

Always switch off, unplug and
G
dismantle before cleaning.
Empty the goblet before unscrewing
G
it from the blade unit.
Don't immerse the blade unit
G
in water.
The blender goblet and mill jar can
G
be washed in your dishwasher.
power unit
Wipe with a damp cloth, then dry.
G
Don't immerse the power unit in
G
water.
(if supplied)
into the mill
– ensuring the
into the
Max Qty
50g
50g
100g
1 ⁄ cm cubes
2
10g
100g
50g
5
7 After milling, you can replace the
blade assembly with the mill lid.
hints
For optimum performance when
G
processing spices we recommend
that you do not process more than
50g at a time in the mill.
Whole spices retain their flavour for a
G
much longer time than ground
spices so it is best to grind a small
quantity fresh at a time to retain the
flavour.
To release the maximum flavour and
G
essential oils whole spices are best
roasted prior to milling.
Herbs are best chopped when clean
G
and dry.
Speed
5
5
Pulse
5
5
Store excess cord in the storage
G
area at the back of the power
unit .
blade assembly
1 Unscrew the blender or mill base
from the goblet. Then remove the
blade unit by pushing up from
underneath.
Care should be taken when
G
removing the blade unit from
the blender or mill base.
Operating time
10 seconds
30 seconds
5 seconds
5 seconds
30 seconds
30-60 seconds