Philips HR2355/09 Benutzerhandbuch Seite 18

Selecting the pasta making program
• Do not select the extrusion-only program before the dough mixing
is complete. Otherwise, this will damage the Pasta maker and its
lifetime.
• Do not disconnect the power cord before processing is complete. If
you have to stop processing, press the on/off button
the Pasta maker and then disconnect the power cord from outlet
before performing other operations.
• To better protect the lifetime of the appliance, it is recommended
the continuous working time be less than 45 minutes. You can restart
using the appliance after a 15 minute rest.
• If you intend to use the appliance continuously, clean the shaping
disc with the supplied cleaning tool each time after each pasta
making session. For cleaning ease, do not soak the shaping disc
directly in water.
1
Connect the power plug to any 220-
240V AC outlet. The Pasta maker will
sound once, and all indicators will flash
once. Press the power on/off button
to switch on the Pasta maker.
2
Based on the amount of flour, press the
servings button
~ 300g or to make ~ 600g of fresh
pasta.
18 English
Important
to select to make
to turn off