Troubleshooting - Philips HR2355/09 Benutzerhandbuch

This chapter summarizes the most common problems you could encounter
with the appliance. If you are unable to solve the problem with the
information below, visit www.philips.com/support.
The indicators do not light up.
• The power plug is not connected correctly.
Check whether the power plug is plugged correctly and the outlet is working properly.
• The on/off button is not pressed.
Press the power on/off button
After pressing the start/pause button
it does not work.
• The chamber is assembled incorrectly.
The shaping disc, or the front panel is assembled incorrectly.
Make sure you follow the user manual to assemble all parts correctly.
• The preferred servings is not selected.
Make sure you have selected the servings before pressing the start/pause button.
The safety switch is triggered and the appliance suddenly stopped or
suddenly restarts during the processing.
• The front panel knob is loose.
Make sure the front panel is securely assembled.
• Excessive ingredients in the Pasta maker.
The maximum amount of flour used for each batch is 500g. If more than 500g is added,
reduce the amount of flour before next batch.
During processing, the appliance stops. There is no alarm sound or
flashes.
• The Pasta maker has overheated due to long continuous working time.
Disconnect from the power, and allow the Pasta maker to cool down. To better protect
the lifetime of the appliance, the continuous working time should be less than 45
minutes. You can restart using the appliance after 15 minutes of rest.

Troubleshooting

.
the appliance sounds but
English 23