Philips HR2355/09 Benutzerhandbuch Seite 13

Put the shaping disc onto the disc holder ❶ , and make sure it is firmly
4
fixed on the disc holder ❷ .
Note:
• Make sure the inner
cavity of the shaping
disc and disc holder is
properly fitted.
5
Attach the front panel to the main unit.
❶ Disc holder safety switch lever
Note:
• Make sure the front panel is completely
fastened before using the appliance.
• The front panel is heavy. Take extra caution
when assembling it.
6
Fasten the front panel control knobs.
Note:
• If the front panel or the shaping disc is not
properly assembled, the safety switch will
prevent the appliance from working.
7
Close the mixing chamber lid properly.
Note:
• If the mixing chamber lid is not properly
installed, the safety switch will prevent the
appliance from working.
1 2
1
1
2
English 13