Display And Key Functions; Operation And Functions - Klarfit Azura Plus Handbuch

DISPLAY AND KEY FUNCTIONS

Time (TIME)
Speed (SPD)
Distance (DIST)
Calorie (CAL)
Odometer (ODO)
Pulse (PUL)
Key Functions
MODE/SELECT/RESET
SET
LÖSCHEN (RESET)

OPERATION AND FUNCTIONS

Auto on/off
The system turns on when any key is pressed or when it sensor an input from
the speed sensor.
The system turns off automatically when the speed has no signal input or on
key are pressed for approximately 4 minutes.
Reset
The unit can be reset by either changing battery or pressing the MODE key for
3 seconds.
Mode
To choose the SCAN or LOCK if you do not want the scan mode, press the
MODE key when the pointer on the function you want which begins blinking.
00:00 - 99:59
0 - 99.9 km/h (mph)
0 - 999.9 km (mi)
0 - 9999 kcal
0 - 999.9 km (mi)
40 - 240 BPM
This key lets you to select and lock on to a
particular function you want.
Can to proceed the data establish for
"TIME" "DISTANCE" "CALORIES".
The key to reset the value to zero by
pressing the key.
EN
49