Empty Cycle - hanseatic CM2083ST Gebrauchsanleitung

2. Press the button (5). The
00: 0 0 indicator will stay contin-
uously lit (standby status).
3. Press the "H" button (9) until
the current hour is flashing on
the display (7).
4. Press the "M" button (8) until
the current minute is flashing
on the display.
After approx. 5 seconds, the
time will stay continuously lit.
The time is set.
The time will be erased
when you disconnect the
coff ee machine from the power
supply.
Getting started Page EN-13

Empty cycle

Before the first use, after descal-
ing and after long periods of dis-
use, percolate three full loads of
water (with no coffee powder) and
pour them away afterwards.