Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Original Instruction Manual
tool
Switch on
• Wait until the machine has reached full speed.
• Place the accessory on the workpiece.
• Slowly m ove t he m achine along t he pre-drawn l ine, firmly pr essing t he
accessory against the workpiece.
• Do not apply too much pressure on the machine. Let the machine do the work.
• Apply less pressure when the machine starts to vibrate heavily.
Switch off the machine and wait for the machine to come to a complete standstill before
putting the machine down. Switch off: Push it back to the position 0 to switch off the
tool.
MAINTENANCE
Make sure that the machine is off and disconnected from the mains
when carrying out maintenance wok on the motor.
These machines hav e bee n designed t o operate over a l ong period o f t ime w ith a
minimum o f maintenance. C ontinuous s atisfactory oper ation d epends u pon pr oper
machine care and regular cleaning.
Cleaning:
Keep the ventilation slots of the machine clean to prevent overheating of the motor.
Regular clean the machine housing with a soft cloth, preferably after each use. Never
use sovents such as petrol, alcohol, ammonia water, etc. These solvents may damage
the plastic parts.
Lubrication
The machine requires no additional lubrication.
STORING
Store the machine, operating instructions and where necessary the accessories in the
original packaging. In this way you will always have all the information and parts ready
to hand.
Pack the device well or use the original packaging in order to avoid transit damage.
9
Switch off
En
01/2017
Werbung
Inhaltsverzeichnis
