Language; Outputs; Contrast; Date And Time - Consort C6010 Anleitung

The measuring electrode should be connected to the coaxial INPUT connector. If
separate electrodes are used, connect the reference electrode to the REF. ter-
minal. Automatic temperature compensation and temperature measurements are
possible by plugging a Pt1000 temperature probe into the °C terminals. You can
also use a combination pH electrode with built-in Pt1000. Its banana plugs should
be inserted in the °C terminals. Without Pt1000, the manual temperature compen-
sation is automatically switched on.
An insulated standard USB port is provided for interfacing the instrument with a
computer.
1. Press MODE.
2. Select [MENU] and press OK.
3. Select [SYSTEM] and press OK.
4. Select [LANGUAGE] and press OK.
5. Select the desired language and press OK.
1. Press MODE.
2. Select [MENU] and press OK.
3. Select [SYSTEM] and press OK.
4. Select [CONTRAST] and press OK.
5. Adjust the con trast and press OK.
1. Press MODE.
2. Select [MENU] and press OK.
3. Select [SYSTEM] and press OK.
4. Select [DATE/TIME] and press OK.
5. Select [MODIFY] and press OK.
6. Adjust date and time and press OK.
1. Press MODE.
2. Select [MENU] and press OK.
3. Select [SYSTEM] and press OK.
4. Select [PASSWORD] and press OK.
5. A private code can be pro grammed to avoid unde sired access to the instru-
ment. Select [YES] and press OK to enter your secret sequence of 5 keys.
1. Press MODE.
2. Select [MENU] and press OK.
3. Select [SYSTEM] and press OK.
4. Select [POWER MANAGEMENT] and press OK.
5. Select [POWER OFF] (batteiesy or DC power) and press OK.
6. Adjust the time to shut down and press OK.
7. Select [BACKLIGHT] (only in case of DC power) and press OK.
8. Select [YES] or [NO] and press OK.
C6010 • C6020 • C6030 C6010 • C6020 • C6030 C6010 • C6020 • C6030 C6010 • C6020 • C6030
Inputs

Outputs

Language

Contrast

Date and time

Date and time

Password

Password
Power management
2