Getting Started; Installing The Vehicle Body - ECX TORMENT ECX4000S Bedienungsanleitung

gettIng started

1. Power on the transmitter.
2. Power on the ESC.

InstallIng the VehIcle Body

3. Do a test of the transmitter's control of the vehicle with
the vehicle's wheels off the ground.
4. Start driving slowly, and, if the vehicle does not go straight,
adjust the steering trim dial on the transmitter.
notIce: Seat the motor brushes by driving smoothly on a flat
surface during use of the first battery charge. Properly seating the
motor brushes will increase the life and performance of the motor.
EN
7