Thermalright TRUE Spirit 120 Direct Bedienungsanleitung Seite 11

Step 4:
Step 4 : Apply the Thermal Paste
Apply the Thermal Paste to the base of the heat-sink and the surface of the CPU evenly. (A flat edge,
like a business card or an old credit card would be beneficial in spreading the Thermal Paste.)
Step 5:
Step 5: Easy Access
Place the Heatsink Body on top of the CPU.
And then use the two M3L7 Screws to secure the
Anchoring Mount"
Step 7:
Step 7 : Installation completed
Plug in the fan connector to the CPU PWM Fan
socket on the motherboard. Installation complete.
The Ultimate Cooling Solutions!
Step 6:
Step 6 : Fan Installation
Place the included TY-121B onto the Heatsink
Body. And then secure it with the Fan Clips, by
pulling the Fan Clips to place the four ends at the
four holes on the TY-121B.
www.thermalright.com
8